Mr.Hobby GSI-T315 Acrysion Solvent-R 250ml Airbrush Thinner Bottle  [GSI-T315]

Mr.Hobby GSI-T315 Acrysion SOLVENT-R 250ml For Airbrush
Price:
NZD$15.33
Brand:
Mr.Hobby
Model:
GSI-T315
Condition:
Brand New
Write a review

Airbrush Thinner for Smooth Coverage

Mr.Hobby's GSI-T315 Acrysion Solvent-R in a 250ml bottle is created to thin paints for airbrush work, pairing particularly well with the Aqueous Hobby Color line to deliver even spray patterns and steady flow.

Perfect for Small Scale Detailing

Use this solvent when working on delicate model parts or fine panel lines to get better control over droplet size and layering, helping you achieve neat edges and consistent colour depth.

Mixing Advice and Compatibility

It is compatible with many acrylic model paints and is tuned for use with Mr.Hobby Aqueous Hobby Color. Test your mix on scrap before spraying full surfaces, and adjust ratios to suit humidity and nozzle size.

Will this affect paint adhesion on plastic kits?

When used correctly it should not harm adhesion. Ensure the model is clean and primed, and avoid overly thin mixes that might undercut the paint film. Do a small adhesion test first.

What mix ratios work best with Aqueous Hobby Color?

Ratios vary by airbrush and paint, but many modellers start at about 10-30% solvent to paint. Adjust in small steps until you reach a smooth spray for your nozzle size.

Does it need special ventilation when spraying?

Always spray in a well ventilated area or use an extraction unit. Wear a mask rated for paint vapours and keep solvents away from open flames and heat sources.

Can I store mixed paint that uses this solvent?

You can store small amounts in airtight containers, but label with mix ratio and date. Use within a reasonable time as separation or drying can occur.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved