Mr.Hobby S46 Mr.Color Clear Spray 100ml - Clear Coat for Figures  [GSI-S46]

Mr.Hobby S46 - Mr.Color Spray Clear Color 100ml
Price:
NZD$15.33
Brand:
Mr.Hobby
Model:
GSI-S46
Condition:
Brand New
Write a review

Protect and Shine Your Builds with Mr.Hobby S46

The S46 Clear Color Spray from Mr.Hobby is a lacquer clear aimed at hobbyists who want a neat, long-lasting finish. In a 100ml aerosol it works well on painted plastic models and sculpted figures when applied with care.

What the S46 Clear Delivers

S46 provides a glossy protective layer that locks in paint and increases surface hardness. The lacquer composition gives a high sheen and good resistance to mild handling and display wear.

Hints for Best Application

  • Clean and dry parts thoroughly to prevent dust or grease from spoiling the finish.
  • Warm the can by holding it in your hands briefly, then shake for a steady spray.
  • Keep the can moving and use several light passes rather than one heavy coat to reduce runs.
  • Let coats tack off before adding more, and give the finished piece time to cure fully.
No, this lacquer clear is formulated for polystyrene and resin models; polycarbonate shells need paints made specifically for that plastic type.
When used correctly in light coats, S46 will seal decals without lifting them, but test on scrap or use a decal solvent-safe clear if you have delicate waterslide transfers.
Priming is recommended for bare plastic to improve adhesion and to ensure a uniform topcoat, especially for thin or translucent paints beneath the clear.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved