MS2.0 Steel Screw Kit with 120-degree Heads for Precise Fit - Yokomo MS-SSA20  [MS-SSA20]

Yokomo MS-SSA20 High-precision machined steel screw set for MS2.0 aluminium chassis (120-degree/31-piece set)
Price:
NZD$53.12
Brand:
Yokomo
Model:
MS-SSA20
GTIN:
639342230853
Condition:
Brand New
Write a review
alt="Yokomo MS-SSA20 High-precision machined steel screw set for MS2.0 aluminium chassis (120-degree/31-piece set)" title="Yokomo MS-SSA20 High-precision machined steel screw set for MS2.0 aluminium chassis (120-degree/31-piece set)"

Designed for thin-plate MS2.0 assemblies

The MS-SSA20 kit is built with the MS2.0 aluminium chassis in mind, where thin plate thickness and tight clearances are part of the design. The MS2.0 platform employs a 1.5mm plate to allow intentional chassis flex, and traditional 90-degree flat head screws can stick out and clash with nearby parts.

By using 120-degree tapered heads, these screws seat lower in countersinks and lower the risk of top-side interference while maintaining secure clamping of mating parts. All pieces are manufactured with high-precision machining to improve dimensional consistency across the build, aiding repeatable assembly and predictable behaviour on high-traction surfaces like carpet.

The pack supplies common lengths for a single MS2.0 assembly so builders do not have to mix head profiles during construction, simplifying setup checks for deck clearance and chassis flatness.

Specifications

  • Item: High-precision machined steel screw set
  • Material: Steel
  • Model Number: MS-SSA20
  • Head angle: 120-degree tapered head
  • Sizes: M3 x 6mm (17 pcs), M3 x 8mm (14 pcs), total 31 pcs
  • Compatibility: MS2.0 aluminium chassis, supported chassis MSR-020A / MSR-020

Use this set for building or servicing MS2.0 aluminium chassis to ensure consistent head seating and to avoid deck-level interference that can affect component location or chassis response.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will these screws handle repeated assembly without deformation?

The screws are machined from steel and intended for repeated use; precision machining improves thread and head tolerance, reducing the chance of deformation under normal assembly and maintenance cycles.

Do 120-degree heads change clamping compared to 90-degree heads?

No significant loss of clamping is expected. The 120-degree head changes seating geometry so the screw sits lower in the countersink while still delivering secure clamp force to the joined parts.

What exactly is included in the pack?

The pack includes 31 steel screws: 17 of M3 x 6mm and 14 of M3 x 8mm, sized to cover a typical single MS2.0 aluminium chassis build.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved