Yokomo SG-64108 64 Pitch 108T High Precision Spur Gear  [SG-64108]

Price:
NZD$5.74
Brand:
Yokomo
Model:
SG-64108
GTIN:
11
Condition:
Brand New
Write a review

Precision 108T Spur for 64-Pitch Setups

The Yokomo SG-64108 Precision Spur Gear suits hobbyists tuning drivetrains for cleaner tooth engagement. It features 108 teeth on a 64-pitch standard to promote steady torque delivery through the gearbox.

Fitting and Compatibility

Install this spur in models specified for 64-pitch gear sets and pair it with a 64-pitch pinion to preserve correct mesh and avoid accelerated wear. It works for both competitive and casual tuning jobs where consistent engagement matters.

Care and Adjustment

Set the mesh carefully to prevent binding and check for grit or nicks after regular runs. Minor alignment tweaks and light lubrication will help maintain smooth operation.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does the SG-64108 need a break-in period?

A short run-in at low load can help bedding and reveal any mesh issues. Monitor for unusual noise and adjust mesh if needed.

What pinion should I use with this spur?

Use a pinion that matches the 64-pitch specification. Mixing pitches will cause poor mesh and rapid tooth damage.

Can it cope with higher torque setups?

It can be used in higher torque applications, but ensure bearings, motor mount and mesh are correctly set to reduce stress on the teeth.

How do I know when to replace the spur?

Replace the spur if you see rounded or chipped teeth, growing backlash, or persistent noise that adjustment cannot fix.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved