RACE OPT 64P Spur Gear 112T POM - Precision 64P 112T Gear  [RO-SG64112]

RACE OPT 64P Spur Gear , 112T (POM)
Price:
NZD$9.46
Brand:
RACE OPT
Model:
RO-SG64112
Condition:
Brand New
Write a review

Tune gear ratios with the RACE OPT 64P Spur Gear 112T

The RACE OPT 64P Spur Gear 112T POM is a 112-tooth 64P spur gear moulded in POM, aimed at modellers wanting accurate ratio control in 1/10 on-road cars. Its consistent tooth profile makes it handy for changing gearing without unpredictable backlash.

Why POM works well in spurs

POM is valued for low friction and dimensional stability, which helps the teeth hold form under repeated runs. That translates to predictable performance when you are fine tuning speed versus torque on different layouts.

Best use cases and compatibility

This 64P 112T spur is most relevant for competitive on-road and track-focused hobbyists who adjust gearing often. Confirm your pinion pitch and clearance before fitting to ensure correct mesh and smooth operation.

Can I swap between different tooth counts easily?

Yes, changing the spur to a different tooth count is common for tuning top speed or acceleration. Just check that the new spur is 64P to match your pinion and then adjust mesh and belt or shaft spacing as needed.

Is the RACE OPT 64P Spur Gear 112T POM noisy?

POM tends to run quieter than many metal options due to lower friction and slightly more forgiving engagement. Proper mesh adjustment is still the key to minimising noise.

Does it require any special maintenance?

Routine checks for chipped teeth and secure mounting are usually enough. Replace the spur if you see uneven wear and keep the mesh tidy for the longest life.

Will this affect handling or power delivery?

Changing spur tooth count alters gear ratio, which affects acceleration and top speed but not steering behaviour directly. Use gear changes alongside suspension and tyre setups for full tune-ups.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved