RADTEC RAD-YK-10007 Aluminium 45.7mm Suspension Mount for BD7-2015  [RAD-YK-10007]

RAD-YK-10007 Aluminum Suspension Mount for BD7-2015, 45.7mm
Price:
NZD$20.80
Brand:
RADTEC
Model:
RAD-YK-10007
Condition:
Brand New
Write a review

Upgrade the Yokomo BD7-2015 with RADTEC RAD-YK-10007 Aluminium Mount

The RADTEC RAD-YK-10007 aluminium suspension mount is crafted to suit the Yokomo BD7-2015 chassis and is sized at 45.7mm for a close fit. It is a useful replacement for hobbyists wanting firmer control and improved part longevity on the track.

Performance Benefits of an Aluminium Mount

Aluminium parts strike a good balance of stiffness and lightness, helping the Yokomo BD7-2015 respond more promptly to steering inputs. The RADTEC mount helps keep suspension angles stable under load, which reduces unnecessary wear on linked components.

Simple Installation and Care

Installation is straightforward on stock BD7-2015 setups and does not usually require custom work. Tighten bolts evenly and recheck after initial runs. Routine checks and cleaning will keep the mount performing reliably session after session.

Is the RAD-YK-10007 compatible with modified BD7-2015 builds?

It is designed for standard BD7-2015 geometry. If your car has non-standard suspension mounts or chassis mods, check fitment before final installation.

Will this mount change handling for high grip tracks?

The stiffer aluminium mount can improve steering response on high grip surfaces, but you may need to fine tune shock settings and toe for best balance.

Do I need special hardware to fit this part?

Most installs use the stock fasteners. Keep a spare set of screws and thread lock handy just in case replacements are needed after inspection.

How often should I check the mount after racing?

Check mounting bolts and surfaces after every few sessions, and inspect for impact damage after any heavy collision to avoid handling drift.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved