Right-Side Center Bulkhead for BD9 - B9-302RA Yokomo  [B9-302RA]

Yokomo B9-302RA Center bulkhead (Right) for BD9
Price:
NZD$43.75
Brand:
Yokomo
Model:
B9-302RA
GTIN:
0639342182282
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MRTC-BD919S category
Write a review

Right-side center mount for BD9 cars

This item is a right-side replacement center bulkhead intended for BD9 on-road RC chassis. It is supplied as the single right unit and suits builders needing a direct-fit part for routine service or repairs.

Confirm compatibility with the supported chassis models listed by the maker before installing. The center bulkhead secures drivetrain and suspension geometry at the chassis center, and this right piece pairs with its left counterpart to complete the centre structure.

Installation advice: check mating faces and screw locations on MRTC-BD919 or MRTC-BD919S frames, retain reusable fasteners where suitable, and inspect driveshaft and link clearances after assembly. This is an RC-scale accessory part.

Specifications

  • Item Center bulkhead (Right)
  • Material Not specified
  • Model Number B9-302RA
  • Compatibility MRTC-BD919, MRTC-BD919S (BD9)

Use this right-side bulkhead when a direct replacement for a BD9-compatible chassis is required, and verify fit against your MRTC-BD919 or MRTC-BD919S layout before securing the assembly.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What is the construction material of this bulkhead?

The supplier listing does not specify material. Inspect the item on receipt and compare with your original part if material properties are critical.

Can this bulkhead be strengthened for heavy use?

Reinforcement methods vary by user; because material and thickness are not listed, any modification should be trialed carefully to avoid interfering with mating surfaces.

How do I confirm this is the correct right-side part?

Compare the part number B9-302RA and the right-side mounting pattern against your current center bulkhead on the MRTC-BD919 or MRTC-BD919S chassis.

Should I expect to replace other components at the same time?

Inspect adjacent items such as driveshafts, bearings, and link mountings and replace any worn components to avoid repeat disassembly.

Is orientation important when fitting this piece?

Yes. This is the right-side bulkhead and must be installed on the correct chassis side to align drivetrain and suspension locations properly.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved