Rustler VXL Front Gearbox Upgrade 6061-T6 RUS4012 for TRAXXAS by GPM  [RUS4012]

TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012
Price:
NZD$85.53
Brand:
GPM
Model:
RUS4012
GTIN:
4894538319439
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012" title="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012"
alt="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012" title="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012"
alt="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012" title="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012"
alt="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012" title="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012"
alt="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012" title="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012"
alt="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012" title="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012"
alt="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012" title="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012"
alt="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012" title="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012"
alt="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012" title="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012"
alt="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012" title="TRAXXAS 1/10 Rustler VXL Aluminum Front Gear Box - 19pc set - GPM RUS4012"

Heavy-duty front gearbox for Rustler VXL

This aftermarket front gearbox is a scale-minded replacement for the TRAXXAS Rustler VXL platform. The design unifies the front differential housing and fasteners into a 19pcs upgrade set to stabilise the front diff and keep gear engagement predictable in rough running or competitive practice.

The main housing is machined from 6061-T6 aluminium to increase strength over typical plastic parts, with machined fins on the outer faces to assist heat dispersion around the front differential. This kit is intended for hobby use on compatible 1/10 TRAXXAS vehicles and not for road-going applications.

The package is supplied as a full mounting kit to swap into the stock front gearbox layout so the gearbox, differential and associated gears can remain aligned under higher torque and impact loads.

Compatible Models

  • TRAXXAS RUSTLER 4X4 VXL 67076-4
  • SLASH 4x4
  • SLASH 4x4 LCG
  • XO-01

Select this front gearbox when you want reduced flex and better thermal behaviour for 1/10 TRAXXAS Rustler and Slash 4x4 setups; check clearances and keep original bearings and lubricant where recommended.

Does this fit Slash 4x4 variants?

Yes, Slash 4x4 models listed in the compatibility box are included, but verify chassis revision and mounting dimensions before installation.

How is heat handled with this aluminium housing?

The machined fins and aluminium construction help disperse heat from the front differential area more effectively than sealed plastic housings.

Are bearings included?

Bearings should be retained from the stock assembly where applicable; the set provides the aluminium housings and the stainless fasteners needed for mounting.

Will this change wheel alignment?

It is designed to match stock geometry, but you should inspect alignment and gear mesh after fitting and under full suspension travel.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved