Schumacher FT9 Front Topdeck Graphite 2.0 for Setup - Factory Pro O-SCP034  [FP-O-SCP034]

FT9 front topdeck upgrade

This front upper deck is an RC-scale upgrade for the Schumacher FT9 chassis, produced by Factory Pro under the model O-SCP034. The Graphite 2.0 front section swaps into the FT9 topdeck to influence chassis stiffness and the way the front end reacts during setup adjustments.

In practical tuning the front deck works with the main topdeck to change torsional rigidity forward of the centreline, affecting steering feel and stability over bumpy surfaces. Introduce this change as part of step-by-step setup work and log handling differences after each adjustment.

Standard FT9 installation is simple. Remove the screws holding the front topdeck, lift off the old section, position the replacement so the mounting holes line up with the chassis posts and reinstall the original fasteners. Confirm there is no interference with the servo or steering linkages before final tightening. Use an appropriate hex key and apply light, even torque to protect the graphite.

Maintenance advice: check mounting holes and mating faces for damage after impacts, keep joints clean, and re-tighten screws after the first runs. Handle this aftermarket graphite piece carefully and avoid overtightening the small screws.