Schumacher Mi10 - 1mm Graphite 3.0 Rear Bulkhead Plate by Factory Pro O-SCP046-2  [FP-O-SCP046-2]

Product brief for the Mi10 rear bulkhead

This aftermarket rear bulkhead plate from Factory Pro is intended for use on the Schumacher Mi10 chassis and is supplied as a matched pair. It serves as an RC-scale structural hop-up to modify rear chassis stiffness for tuning purposes, not for any full-size application. The component is listed under Factory Pro model O-SCP046-2 and is fabricated from Graphite 3.0 at a 1mm thickness as named above.

Functionally, the plate installs at the rear bulkhead to change torsional rigidity and the rear suspension response. Use this part to make incremental adjustments to rear balance or when replacing a damaged plate. Installation normally uses the Mi10's existing mounting points; verify screw lengths and alignment to prevent interference.

Tuning guidance: a thinner or stiffer plate will change how weight shifts and rear traction behaves at the model scale; make gradual changes and log results. Inspect graphite parts for stress or cracks after impacts and during routine checks.