Schumacher Mi10 1mm Graphite Front Bulkhead Plate Compatible Upgrade - O-SCP045-2 by Factory Pro  [FP-O-SCP045-2]

Front Bulkhead Plate for Schumacher Mi10

This aftermarket front bulkhead plate from Factory Pro is tailored for the Schumacher Mi10 chassis, delivered as one pair in Graphite 3.0. The plate occupies the front bulkhead position to subtly change front-end stiffness and mounting geometry without altering the stock bulkhead arrangement.

Fitting is simple for builders used to Mi10 layouts: remove the existing plate, check that suspension mounts and steering linkages line up, and where possible fit the original hardware. Only a hex driver is normally needed and trimming of adjacent components should not be necessary.

As a 1mm graphite upgrade it slightly raises torsional stiffness at the nose, influencing steering feel and front traction. Introduce it alongside tyre, damper, and roll-center tweaks to isolate the handling impact.