Serpent item SER400007 - S411 190mm Ready-to-race - 1/10 scale AWD Electric Powered On-Road Touring Cars RTR (Ready-to-Run)
Serpent 190mm 1/10 scale ready-to-Race Touringcar, on the basis of the effective 411 race-cars. Factory assembled, with race-wheel-tyres, pre-cut and prepainted human anatomy, Dragon-RC electronic speedo, Dragon-RC brushless 9T motor, Dragon-RC DTS-1 2.4ghZ transmitter. The complete package to begin rushing in electric touringcar category or simply competition anywhere for enjoyable.
Specs:
- Course: 1/10th scale 190mm Electric
- Function: 190mm touring vehicle
- Chassis: 2.5mm glass soluble fbre, CNC machined
- Suspension: Front C-Hub suspension system system system system system
- Rear axle: back gear- differential
- Front axle: Front nylon spool
- Drive system: 4wd through 2 kevlar strengthened timing belts
- Shock absorbers: RCM surprise absorbers
- Wheel base: 254mm +/- 4mm
- Track-width front component: 190mm /- 6mm
- Track-width rear: 190mm /- 6mm
- Adjustability: Camber, Caster, Up-Down-stops, Toe-in, width & Roll centres
- Guidelines: complete color instructions, reference guide
- Included: engine, price Controller, tires, human anatomy, radio gear.
- Not included: Battery Lipo and 4 x AA battery power for radio, charger
Features:
Chassis
Supernarrow, symmetrical , durable black colored colored colored glass-fibre chassisplate with optimised flex design, countersunk holes, primary component holes all completely in center, pockets for geardiff, spool and spur.
Topdeck
Durable black colored glass-fibre topdeck with optimised flex design.
Battery-mount brackets and Lipo-holders
user friendly nylon batter tape owner, which allow the battery tape to do over in the place of in framework. The holders are reversed for virtually any other electric batteries spot. The Lipoholders will firmly keep the Lipo constantly in place, also at difficult impact.
Servo-mount
The servo is mounteded on another meal, so flex is less impacted.
Shocktower front part
Ebony glass fiber shocktower with 3 top surprise mounting holes available . Holes for a supplementary main bodypost already are made also.
Front side bracket
Machined aluminium front part brackets, with gear anxiety adjusting through excenters. Suspension brackets in durable nylon.
Front suspension system system system
Durable reduced front component wishbones attached to the inner brackets with strong steel pivot pins. An anti-roll club system may be create as choice.
C-hub / steeringblock
The c-hub type front part system creates a fantastic accurate steering feeling with great feedback, and strong wheelguidance without chatter.
Shocktower right back
Black cup soluble fbre shocktower with 4 top surprise mounting holes available . The trunk bodyposts are positioned up close to the top of straight back shocktower.
Rear bracket
Machined aluminium back brackets, with gear stress adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR RR and split type 0.0 obstructs RR FR
Back suspension
Durable paid down back wishbones with this specific inside brackets with strong steel pivot pins. An anti-roll club system could be put up as option.
Back upright
Strong rear uprights with 2 top jobs, for perfect guidance of back tires.
Motormount
Machined aluminium motormount / center shaft support.
Center shaft
Ballraced center shaft with 2 small pully?s as well as the primary Serpent spur gear.
Bumper
Big foam front side bumper captured by a premiere and repaid nylon bumper
Bodymount
Front bodymount is established through front bumper, along with right back individuals are seated concerning the shocktower. Multiple bodyposiiton holes available.
Gear-diff
very lightweight ballraced geardifferential in straight back, with steel gears and axles for durablity. Supersmooth.
Spool
Front nylon lightweight spool with screw mounted front gearpulley
Transmission / belts / pulleys
Smooth low friction fine pitch belts alongside optimised nylon pulleys
Driveshaft / wheelhex / wheelaxle
steel driveshafts, and ballraced wheelaxles and nylon wheel-hex adaptors
Steering system
Steering system with optimised ackermann for fundamental steering-feeling.
Shockabsorbers
Latest sort RCM competition shockabsorbers with membranes and examined colorcoded competition springs.
Ball-bearings
completely ballraced with oiled higher-level sealed stainless bearings.
Tyres-wheels
The 411-RTR has Dragon-RC synthetic rushing tyres with foam inlays on Serpent TC wheels for super-grip.
Body
The EFRA approved 1/10 scale Serpent TC human body Lex-is installed, fully pre-cut and prepainted in an excellent paintjob with 4 colors.
Electronics
The 411 RTR includes Dragon-RC electronic 35A speedcontroller, Dragon-RC non sensored brushless engine 9T 3000 kv, Dragon-RC DTS-1 electronic 2.4 gHz pistol-typetransmitter with big LCD display, Dragon-RC electronic receiver in 2.4 gHz and Dragon-Rc electronic servo 0.13s - 6kg.
Optionals / upgrading
The Serpent 411 Sport is launched in the most really effective end competition form of the 411. All elements from 411 race-version and all optionals, additionally fit the 411 Sport. This permits one to increase your 411 Sport to a larger level battle spec action by action, with all the elements you choose. The 411 Sport parts manual shows those elements, and you will see them inside optionals area of the 411 Sport and.
