Serpent 1093 Centax 5x8 Shim Pack - Fine Adjustment  [SER1093]

Serpent SER1093 Centax 5x8 shim-set 0.1 (2) 0.3 (1)
Price:
NZD$7.67
Brand:
Serpent
Model:
SER1093
Condition:
Brand New
Write a review

Micro shims for precise Centax clutch tuning

Hobby tuners can use the Serpent 1093 Centax Clutch 5x8 Shim Set to correct end-play and sharpen clutch action. The parts are aimed at improving clutch stability and repeatability for consistent track performance.

Small parts, precise results

The shims are intended to sit outside the thrust-bearing bushing so you can control end-play without modifying the clutch internals. This set contains two 0.1mm spacers and one 0.3mm spacer to cover common tuning steps.

Better control under acceleration

Tweaking the end-play can reduce unwanted movement and lead to a cleaner engagement point, which helps when powering out of corners or launching from a standstill.

Are these shims compatible with all Centax clutch housings?

These shims are designed for Centax clutch setups that accept external shimming on the thrust-bearing bushing. Check your clutch housing clearance before fitting.

Will adding shims change the clutch engagement point?

Minor changes to end-play can slightly affect engagement characteristics. Use the 0.1mm shims for fine adjustments and test progressively to find the preferred engagement feel.

What tools do I need to fit the shims?

Basic hand tools such as small screwdrivers and needle-nose pliers are usually enough to access the thrust-bearing area. A clean workspace and a magnifier help with thin shim handling.

How many shims should I try at once?

Start with one 0.1mm shim and test. If more correction is needed, add another 0.1mm or swap in the 0.3mm to reach the desired end-play without over-tightening.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved