Serpent 160330 - L27 Tuned Rear Springs for 1/8 Scale [SER160330]

Price:

NZD$39.10

Brand:

Serpent

Model:

SER160330

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Serpent - Viper Series - Viper 988 1/8 GP (SER903017)

Precision Rear Spring Package for Better Traction

Hobbyists looking to refine rear traction will find the Serpent 160330 - L27 springs tailored for 1/8th scale rear shock use. They deliver reliable support and are built to withstand track demands.

Painted Tips for Easy Hardness Checks

The L27 range avoids full coatings and instead uses a paint mark on the tip so the spring rate stays consistent. Each colour corresponds to a defined hardness making set changes quick, and flat ends keep the spring seated solidly.

Updated Colour Rate Lineup

The series spans multiple rates so you can tune rebound and compression by swapping springs:

White: 2.3 N/mm (13 lb/inch)
Yellow: 2.8 N/mm (16 lb/inch)
Orange: 3.4 N/mm (19.5 lb/inch)
Red: 4.1 N/mm (23.5 lb/inch)
Pink: 4.9 N/mm (28 lb/inch)
Blue: 5.8 N/mm (33 lb/inch)
Purple: 6.8 N/mm (39 lb/inch)
Green: 8.0 N/mm (45.5 lb/inch)
Grey: 9.0 N/mm (51.5 lb/inch)
Black: 10.0 N/mm (57 lb/inch)

Do these require special shock pistons?

No special pistons are needed. The Serpent 160330 - L27 springs work with standard 1/8th shock pistons and are intended for typical Serpent rear shock setups.

What does each colour represent?

Each tip colour matches a specific N/mm rating shown in the list. Use the chart to pick softer or firmer springs depending on track grip and driver preference.

Will painted tips wear off with use?

The paint on the tips is applied for identification and is durable under normal installation, but regular inspection is recommended if springs see heavy use.