Serpent SER214015 Rear Right Wheel Rim for 1/10 Buggy White  [SER214015]

Product: 1/10 rear-right rim

The Serpent SER214015 rim is designed as a rear-right replacement wheel for 1/10 off-road buggies. Supplied in white, it matches common 1/10 wheel mounting styles and can be used where a direct-fit replacement is required.

This description concentrates on fitment and practical maintenance. As a scale part, the rim mainly alters tyre seating and offset, which in turn influence rear track width and how the rear axle bears load under acceleration and cornering.

Installation pointers: confirm the hub hex and wheel nut/washer stack prior to installation, seat the tyre bead evenly to prevent imbalance, and check orientation for the rr marking. Tighten wheel hardware to the correct torque and ensure there is no contact with suspension components through full travel.

Tuning considerations: changing rim offset is a common way to modify scrub radius and lateral tyre placement. Small shifts in offset can move the contact patch and alter the rear end's tendency to rotate under power. Pair rim changes with tyre choice and shock setup for the best results.

Care advice: after running inspect the rim bead for damage, clean the rim and tyre mating surfaces before using glue, and rebalance wheels if you observe vibration at speed.