Serpent 401638 1.0mm Aluminum Suspension Spacer Set for S411 - Fine Tuning Shims [SER401638]

Serpent SER401638 Suspension Spacer 1.0 Aluminium S411 4.0 (4)

Price:

NZD$34.09

Brand:

Serpent

Model:

SER401638

Condition:

Brand New

Quantity:

Write a review

Description
FAQ

Accurate Ride Height Shims for the S411

Upgrade your S411 setup with the Serpent 401638 1.0mm Aluminum Suspension Spacer Set to obtain accurate ride height tweaks. These spacers were made to let hobbyists and racers adjust suspension clearance with minimal fuss.

Why Use a 1.0mm Aluminum Spacer

The 1.0mm gauge provides a small but measurable change to suspension geometry, helping you tune front or rear balance. Aluminum brings durability and light weight so you can test settings without adding excessive mass to the chassis.

Can I use Serpent 401638 on a converted chassis?

You can try them on conversions but confirm the spacer thickness and hole alignment match your mount points; mismatched geometry can affect handling.

Do these spacers need threadlocker or grease?

Apply a light threadlocker to metal-to-metal fasteners if you run on rough layouts; avoid heavy lubricants on pivot points to keep movement free.

Which areas of handling will a 1.0mm change affect most?

Small ride height changes influence weight transfer and anti-squat/anti-dive characteristics, so expect differences mainly in turn-in and mid corner balance.