Serpent SER401766 C=7.8 Blue Springs for 4X EVO Pair  [SER401766]

Serpent SER401766 Shock Spring Blue C=7.8 4X EVO (2)
Price:
NZD$12.62
Brand:
Serpent
Model:
SER401766
Condition:
Brand New
Write a review

Blue Spring Upgrade for Serpent SER401766

The Serpent SER401766 shock springs give the 4X EVO a specified C=7.8 stiffness to help drivers refine balance and turn-in. The blue finish makes them easy to identify when testing different setups.

Engineered for Track Stability

These springs are intended to deliver predictable support over bumps and through corners. The C=7.8 rating helps reduce body roll while maintaining traction on both carpet and outdoor surfaces.

Quick Fit and Adjustment

Made to correspond with Serpent 4X EVO shock dimensions, these springs install quickly into standard shocks. They are a practical choice when switching between grip levels or reworking damping settings.

Can I swap these onto other brands of shocks?

They may fit other shocks if the spring seat diameter and free length are compatible, but they are optimised for Serpent 4X EVO specs. Measure before you fit to avoid poor seating.

How do I choose spring preload with these?

Start with minimal preload and adjust to control ride height and initial body roll. Monitor rebound and compression to match damping to the C=7.8 rate.

Are these sold as a pair?

Yes, the product comes as a pair, enough to update two corners or to replace a worn set during regular maintenance.

What maintenance keeps springs performing well?

Keep springs free of dirt and inspect for corrosion or deformation. Clean with a soft brush and light lubricant on shock shafts to prevent binding.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved