Serpent SER411305 Front Ride Height Shim Set for F110 Racing  [SER411305]

Serpent SER411305 Front Rideheight Shim set F110 (6)
Price:
NZD$33.08
Brand:
Serpent
Model:
SER411305
Condition:
Brand New
Write a review

Fine Tuning Front End Ride Height

The Serpent SER411305 Front Rideheight Shim set provides a simple way to alter the F110 front ride height in controlled increments. With six shims included, you can test multiple heights to see how handling shifts in different sections of the track.

On-track Benefits

Tweaking front ride height can improve turn-in and mid-corner balance. These shims let hobbyists and club racers tweak the front end to reduce understeer or to sharpen steering response as needed.

Installation Notes

Specifically made for the Serpent F110, the shims fit into the factory front assembly with minimal effort. They are practical for quick setup changes when track grip or layout varies.

How do I test different shim stacks?

Begin with a baseline stack you know and try one change at a time. Run a few laps after each change and note steering and stability differences.

Can I use these on a modified F110?

If your modifications did not alter the front mounting geometry, these shims should still fit. Double check spacer clearance and spring perch alignment before use.

Do shims change shock action?

Shims adjust static ride height rather than shock damping, but the new geometry can change how the shocks load. Recheck damping after major height changes.

How many shims should I carry to the track?

Bring a selection of common thicknesses and a few spares so you can quickly test setups between practice runs and heats.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved