Serpent 500228 3.5lbs Front Spring Set Purple for SRX2  [SER500228]

Serpent SER500228 Shock Spring Purple 3 5lbs Front (2) SRX2
Price:
NZD$12.78
Brand:
Serpent
Model:
SER500228
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Fine-Tune Your SRX2 with Serpent 500228 Springs

If you want tighter control of your SRX2 handling, the Serpent 500228 spring set is a tidy upgrade. Front springs rated at 3.5lbs give a firmer ride that helps the buggy track truer through corners while still absorbing small bumps.

What the 3.5lbs Springs Bring to the Table

Serpent has a reputation for reliable parts and these springs are matched to the SRX2 geometry for consistent travel and damping feel. Use them to reduce understeer and get more precise steering feedback on technical sections.

Best Practices for Installing Springs

Fitting the Serpent 500228 springs is simple but check that shock shafts are straight and shocks are clean first. Set equal preload on each spring and test incrementally so you can feel how each change affects handling.

Can I use different spring rates front and rear?

Yes, mixing rates is common to tune balance. Pairing a firmer front spring like the 3.5lbs with a slightly softer rear can sharpen turn-in, but test changes one at a time.

Which shock oil pairs well with 3.5lbs springs?

Shock oil depends on track conditions, but mid-range viscosity that matches your driving style is a good start. Adjust oil weight to control rebound with these firmer springs.

How do I check if springs are seated correctly?

Confirm springs sit flush against the collar and that there is even travel on both sides. Run a slow push test and observe any binding or uneven compression.

Are the springs colour coded for rate?

The purple finish helps with quick visual ID, but always check the rate marking or part number when matching springs for a set.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved