SER600039-R Serpent Cobra E-Truggy RTR red - Serpent [SER600039-R]

Serpent SER600039-R Serpent Cobra E-Truggy RTR red

Price:

NZD$885.38

Brand:

Serpent

Model:

SER600039-R

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - Off-Road - Truggy - Electric Powered category

Write a review

Description

Serpent item SER600039-R - Cobra E- red - 1/8 scale AWD Electric Powered Off-Road Truggy RTR (Ready-to-Run)

Introduction

The Serpent Cobra E-Truggy in RTR trim is a superb basher sort automobile that will you need to take numerous beating and its own additionally outstanding package to start with genuine battle ! On the basis of the Cobra E-Truggy oahu may be the outright price, great management, reliability, rigidness and durability you need.

The RTR package is actually dialed:
-factory produce rushing chassis
-prepainted and precut low type truggy human anatomy and big composite backside wing
-premounted truggy tyres/wheels/inserts
-pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
-2000kv brushless longbody engine (DragonRC)
-Digital 2.4ghz transmitter (DragonRC)
-Metal gear servo 16kg ( DragonRC-Savox)
-3 oilfilled geardifferentials
-Big bore shocks with artificial dustboots and machined aluminium shocktowers
-Spring metal transmission elements and turnbuckles, front part and back cvd driveshafts
-Front and straight back anti-roll bars
-Large battery-cases with effortless felcron straps
-Machined aluminium chassisplate
-Fully ballraced
-Batteries the car and transmitter aren't included

The bodyshell is needed orange, red, green, blue and red, also an evident type.

Serpent provides numerous optional elements with this specific car to improve performance, lighter and even for additionally nicer appearance.

Main features

Car
Fully expert pre develop and pre-set framework and electronic devices.

Transmitter
DragonRc 2.4 GHz steeringwheel sort transmitter with lots settings and good range. Includes little and light receiver.

Speedo
DragonRC waterproof speedcontroller with a giant 150A capability to have a handle regarding brushless engine and 4S or 6S battery power

Motor
DragonRC longbody 2000kV brushless motor with effortless colorcoded connectors

Body
Prepainted and pre-cut low e-Truggy human body, in 4 main colors orange, red, Green and Blue. ( furthermore clear one available as optional)

Tyres
Premounted battle prepared tyres / tires with soft substances and pintype profile for amazing grip.

Chassis
Very slim 3mm 7075T6 aluminium framework, with machining regarding top face making it lighter in strategic areas and also to get a handle on flex. Kick-up front side for appropriate landings. Angled component to improve cornering approval, and safe and simple mounting part guards with 5 screws. Countersunk holes, pouches to position the suspension system brackets. Generally the Truggy is made to keep consitently the fat in fact main and towards the centerline as possible, to create an excellent general stability.

Side guards / battery power trays
Durable shaped composite component guards / electric batteries trays that carry on with all the present distinct the chassis, and mount with 5 screws each component. Front and edges adequate to put on the dirt away. The guards/trays create numerous safety. The batteries are setup in longtudinal fashion, maintaining the extra weight low inside car. The battery pack trays features user friendly Serpent noticeable felcron TM straps to secure the batteries in place. Fits 2S and 3S batteries.

Motormount:
The motor lies in the many optimal spot inside car, maintaining motor-forces and transmission elements / positioning in your thoughts. Merely one-screw must secure the BL engine, inside ripped durable machined aluminium motormount. Area for additional motor-cooling available as required. The location the engine enables mounting all popular buggy and (monster)truggy motors.

Composite framework braces
Allows the framework to flex which assists enhance bump handling. Front and rear.

Front bumper
Nicely curved front bumper, just like in regards to the Cobra buggy, to shield the important thing anti-roll club, suspension system system system system brackets, and moves inline with kick-up framework front side for safe landings.

front part suspension
Very long and durable composite reduced wishbones, coupled with upper spring-steel trackrods. 2 reduced shock-mount jobs. Downstops works well as required. Pivotball kind anti-roll club rods.
.
Front steering / servo saver / angled
Innovative angled front component steering create to lessen the angle of distinction between the whole total caster and steering airplane. Therefore you will have less bump steer and a truer steering Ackerman through the entire choice of suspension.

Adjustable springtime packed servo-saver system with interchangeable Ackermann meals. Due to design with this steering bell cranks whenever changing the Ackerman may very well not should adjust your steering tie rods. You merely just will have to adjust your end points by yourself radio.. fairly easy getting using and set-up.

The Inboard Bell crank keeps the lever and linkage on car. It'll advice about preventing injury to the steering system. Zero scrub radiuses on steering knuckle, assists in reducing the jacking impact manufactured by the steering knuckle offset. It provides a far more direct dropped while keeping the automobiles framework more degree while turning.

The front roll center is changed quickly by going the steering knuckle shims with regards to their appropriate locations.

Topped of with a good composite top-plate.

Front steering-block / c-hubs
Very durable front component steeringblock / C-hub construction .

Drive-shafts
very long and lightweight springtime metal products with pushed in metal pins, laser-engraved. Identical size front component and rear.

Wheel-axles / wheel-nut
Serpent springtime metal threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to hold the huge truggy wheels/tyres on program.

Captured universal joints
Guarantees you can expect to complete a race without loosing a pin or set screw. All elements, axles and drive train elements have really capture pins

Front shocktower
Light, strong and durable machined 5mm aluminium products with 5 functions for shockangle.

Shock-set front part and rear
16mm big bore shocks, with hard anodized accuracy threaded shock-bodies. Shockboots in silicone synthetic to hold the dirt away . Chromed shock-shafts for supersmooth shockaction . The more expensive o bands offer less basic anxiety and an improved seal without dragging regarding shock shaft.

Suspension brackets
The hinge-pins / hingepin balls are captured in durable composite suspension system system brackets . These capture the nylon roll-center inserts.

Anti-roll club / anti-roll club linkage with pivotball
The anti-roll pubs front and right back are constructed of quality unique springtime metal, and therefore are also captured on diff-cased in ballbearing for perfect guidance and control.

Receiver field / servo mount / speedo mount
Composite one piece radiobox to firmly install servoï¿½ s, speedo and receiver. For optimum security the light receiver fits the top-case effortless, with a small opening to allow cable to protrude. The speedo seats suprisingly low on a plate right above the framework, for that reason fast cables lets you the motor. The servo is established in a vertical fashion.

Central diff
Optimised primary gear-diff with 50T super-hard spur-gear . Tiny, compact design to reduce rotating mass on max.

Transmission shafts
Durable but light and slim Serpent springtime metal, laser etched shafts.

front part and right back diff
Optimised gear-diff with superhard spur-gears . Little, compact design to scale back rotating mass towards many. Identical variation front side component and backside. Diff coupler in springtime steel seated in big barings for durability.

Rear shocktower
Light, strong and durable machined 5mm aluminum item with 5 positions for shockangle.

Rear uprights
Durable composite back uprights with 3 camber positions

Suspension brackets rear
Durable composite services with eccentric inserts to boost set-up.

Rear wing mount
The composite back wing mount, licenses to alter the angle towards back wing.

Rear wing
Two duration high down force wing, has two quantities of angle, that also includes 2 fins. Helps improve down force and right line capability

Bodymounts
Nylon bodymounts with wider seating our body, firmly fastened on shocktowers.

Super Minimal profile e-Truck Body
Improves look and keeps the profile minimum. Comes precut and prepainted.

Decals
Applied towards body.

Oils / grease
Car is put together with a superior quality silicone sebum the diffs and shocks and black colored oil. Threadlock present which needed.

Manual
Full color manual showing the vehicle, specifications, recommendations and exploded views. The transmitter and speedo have in fact in reality little split manuals included.

Box
Full color protective industry to re-use for vehicle transport or tyres.

Hot Brands

SER600039-R Serpent Cobra E-Truggy RTR red - Serpent [SER600039-R]