Serpent 600769 SRX8 Aluminium Shock Mount Washer Set  [SER600769]

Serpent SER600769 Shock mount washer aluminum (4) SRX8
Price:
NZD$23.16
Brand:
Serpent
Model:
SER600769
Condition:
Brand New
Write a review

Refine SRX8 Suspension with Aluminium Washers

For pilots aiming to tidy up suspension behaviour on a Serpent SRX8, the Serpent 600769 aluminium shock mount washers offer a precise seating surface for your shocks. Made from machined aluminium, these washers resist wear and keep your mounts true lap after lap.

Why Aluminium Makes Sense

Aluminium combines low mass with solid strength, making it a go-to material for suspension hardware. These washers add robustness around the shock top and help stabilise compression and rebound for cleaner handling.

Compatibility Tips and Fitting

The Serpent 600769 washers are cut to sit correctly on SRX8 shock mounts with no trimming required. Fit them during normal servicing to quickly improve mount reliability and repeatability.

Will these fit if I run aftermarket shocks?

They are sized for standard SRX8 shock mounting hardware; if your aftermarket shocks use the same mount dimensions they should work, but double-check shaft and washer dimensions first.

Can I anodise these washers or change colour?

If the parts are bare aluminium, you can have them anodised by a specialist; be aware that coatings can slightly alter thickness so confirm fit after finishing.

Are spacers needed with these washers?

Typically no additional spacers are required when used on stock SRX8 mounts, but measure stack height if you have modified shock towers or different collars.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved