Serpent 600862 Rear Shockspring 3.2lbs Red Pair - Club Racer Choice [SER600862]

Serpent SER600862 Shockspring Rear red 3.2lbs (2)

Price:

NZD$13.25

Brand:

Serpent

Model:

SER600862

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Serpent - Cobra SRX8 Buggy Series - Cobra SRX8 Buggy GP (SER600017)

Tune Corner Balance with Serpent 600862 Rear Springs

Refresh your suspension with the Serpent 600862 Rear Shockspring set. These red springs carry a 3.2lbs rating and are intended for a wide selection of Serpent chassis, helping drivers narrow in on preferred balance and traction. They are useful when adjusting for changing track surfaces or tyre compounds.

Notable Details for the Rear Shocksprings

Compatibility: Works with many Serpent chassis layouts for simple upgrades
Tension: 3.2lbs spring rate aimed at precise tuning
Color: Red finish for quick identification in the pits
Quantity: Supplied as a pair of shocksprings

Can I swap these onto the front shocks?

They can be used front or rear if the spring dimensions and shock travel match your setup, but the 3.2lbs rate is typically chosen for rear ride characteristics on Serpent 600862 applications.

What should I check after fitting new springs?

After installation verify equal preload, inspect damper seals for leaks, and run a few shakedown laps to confirm cornering balance before final tuning.

Are these springs compatible with aftermarket shock caps?

Most aftermarket caps that accept standard Serpent springs will work, but always confirm spring seat height and travel clearance to avoid binding.

When should I choose a stiffer or softer spring?

Choose stiffer springs to reduce roll and improve response on high grip tracks; go softer for more mechanical grip on rough or low grip surfaces. Log changes to evaluate performance.