Serrated Flange Titanium M4 Wheel Nut Set HUDY 296542-C (4 pcs)  [HSP-296542-C]

HUDY 296542-C - Titanium NUT M4 With Serrated Flange - Rainbow Color (4)
Price:
NZD$45.10
Brand:
HUDY
Model:
HSP-296542-C
Condition:
Brand New
Write a review
alt="HUDY 296542-C - Titanium NUT M4 With Serrated Flange - Rainbow Color (4)" title="HUDY 296542-C - Titanium NUT M4 With Serrated Flange - Rainbow Color (4)"
alt="HUDY 296542-C - Titanium NUT M4 With Serrated Flange - Rainbow Color (4)" title="HUDY 296542-C - Titanium NUT M4 With Serrated Flange - Rainbow Color (4)"

Why choose titanium M4 nuts?

HUDY 296542-C supplies a set of four titanium M4 wheel nuts designed for RC car use, each featuring an integrated serrated flange and a rainbow-style finish. The serrations create a mechanical locking interface that reduces back-off under vibration without permanent adhesives.

These nuts suit M4 threaded wheel studs commonly fitted to many 1/10-scale and similar models. Titanium's low mass and high yield strength offer a useful blend of lightness and durability, keeping additional weight low while improving fatigue resistance compared to standard steel counterparts.

To install, thread each nut onto the M4 stud until the serrated flange compresses against the wheel face, then tighten to the required torque with the correct tool. After initial runs, recheck and retorque as part of routine setup verification to ensure secure engagement.

Specifications

  • Item: M4 titanium nut with serrated flange
  • Material: Titanium
  • Model Number: 296542-C
  • Compatibility: General RC car wheel M4 threaded studs
  • Quantity: 4 pcs

A compact fastening solution for modelers seeking a lightweight, mechanically locking titanium option to improve wheel retention without adhesives.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Are these compatible with my wheel studs?

They are compatible with M4 wheel studs; measure your stud diameter if unsure to confirm fit before installation.

What torque should I use?

Use a moderate torque suited to your wheel and stud material so the serrated flange bites without deforming the wheel. Start conservatively and verify retention after a short run.

Does titanium resist corrosion?

Titanium offers excellent corrosion resistance compared with steel, making it suitable for varied track environments; surface finishes may still scratch with heavy use.

How often should I check them?

Inspect and re-torque after the first session and include them in routine wheel checks; the serrated flange reduces loosening but does not eliminate the need for periodic inspection.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved