Soft Topdeck 2pcs compatible with Medius X26 steel EP (SER400052) - Serpent SER402186  [SER402186]

Price:
NZD$0.00
Brand:
Serpent
Model:
SER402186
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Soft topdeck to fine-tune chassis flex

The Serpent SER402186 Topdeck soft is an RC-scale pair of topdecks provided as 2 pcs for tuning chassis flex on the Medius X26 steel EP (SER400052). Compared to stiffer decks, the soft version lowers overall rigidity and changes mid-corner traction and weight transfer in a controlled manner.

Fitting is simple using the Medius X26 steel EP stock mounts and existing hardware; it replaces the factory topdeck while keeping the same mounting points. When installing, make sure the deck is seated flat and that mounting screws are torqued evenly to prevent twisting; afterwards, check alignment and run short trials to confirm behaviour.

Tuning advice: position the soft deck to alter front or rear response as required, and pair changes with spring and anti-roll bar adjustments to reach a balanced feel. Record lap data or driver notes to judge the effect before making further changes.

What step-by-step checks ensure a correct installation?

Fit the topdeck using the stock mounts, confirm it sits flush, tighten screws in a cross pattern to even torque, and verify wheel alignment before test running to spot any twist.

Can I use this to change front or rear balance?

Yes. Changing the position of the soft topdeck in the chassis stack will alter front or rear compliance; combine the change with spring and swaybar tuning to achieve the desired balance.

How many pieces are provided and what should I inspect after fitting?

The set contains two pieces. After fitting, inspect for flush seating, even screw torque, correct alignment, then perform short runs to evaluate handling differences.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved