TA07 Rear Suspension Mounts, Precision Aluminum - JR-TA705-BK for Tamiya TA07 by JAZRIDER [JR-TA705-BK]

Tamiya 58636 TA07 Aluminum Rear Suspension Mount Set (Black)

Price:

NZD$10.89

Brand:

JAZRIDER

Model:

JR-TA705-BK

Condition:

Brand New

Quantity:

Write a review

Description
FAQ

TA07 rear mounting upgrade overview

This kit supplies machined aluminium rear suspension mounts intended for the Tamiya TA07 chassis. They replace the stock plastic mounts to establish a firmer mounting platform for the rear linkages and to deliver consistent geometry references for setup work.

Fitting is straightforward using the TA07's existing pickup and mounting locations. Remove the factory components, ensure the mounting faces are clean, align the aluminium mounts correctly, and secure them with the original screws while confirming proper engagement and torque.

Consider this an under-chassis upgrade that improves stiffness and repeatability rather than a direct change to damper or spring rates. Use incremental adjustments and on-track testing to dial in the handling differences introduced by the stiffer mounts.

What tools are needed to fit these aluminium mounts?

Basic hex drivers and a small torque check are all that is normally required. No specialised tools are necessary, though thread inspection and light threadlocker are recommended where applicable.

Will the aluminium mounts change how I should setup rear toe or camber?

The mounts improve repeatability of geometry settings, so once fitted your toe and camber will be more consistent run to run. You may still need small setup changes to achieve the handling balance you prefer.