Tamiya 18106 NEO-VQS Advanced Pack (VS Chassis) 1/32  [18106]

Tamiya 18106 - 1/32 NEO-VQS (VS Chassis) Advanced Pack
Price:
NZD$0.00
Brand:
Tamiya
Model:
18106
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Detailed Look: Tamiya 18106 NEO-VQS on VS Chassis

This Advanced Pack ships the NEO-VQS in smoke ABS with contrasting dark and clear-yellow accents, built around a VS chassis that targets collectors and race-minded modelers who want factory-picked tune-up components. The snap-fit assembly method keeps build time efficient while the chosen parts lean toward strengthened and race-capable options for VS configurations.

Reinforcement and handling elements are gathered in the kit, including FRP front and reinforcing plates plus a rear brake stay fitted with damping hardware, and very hard low-profile tyres to decrease deflection. The chassis is arranged with extra reinforcement at the bumper and rear-stay sections to help absorb impacts seen in club competition. Key drivetrain parts include low-friction 620 plastic bearings in POM and reinforced plastic gears to deliver a compromise between lifespan and drive efficiency.

This passage describes the kit focus and the reasoning behind the included tune-up parts; full technical details and the exhaustive parts list are presented in the specifications section below.

  • Scale: 1/32
  • Chassis: VS chassis
  • Drive system: 4WD
  • Motor: Light-Dash motor (included)
  • Gear ratio: 3.7:1 (High Speed EX counter gears)
  • Body material: ABS (smoke)
  • Chassis material: ABS (black); A parts made in low-friction resin (clear yellow)
  • Tires: Super hard small-diameter low-profile tires (black)
  • Wheels: A-spoke wheels (yellow)
  • Rollers: 13mm low-friction plastic rollers x6
  • Propeller shaft: 1.4mm hollow propeller shaft
  • Gears: Carbon reinforced G13 gear & 8T pinion gear set
  • Dimensions: Length 159mm, Width 104mm, Height 43mm
  • Assembly: Easy snap-together assembly
  • Included tune-up parts: Light-Dash motor; FRP wide front plates (x2); FRP reinforcing plates (x2); FRP rear brake stay; brake sponge (2mm, blue); 13mm low-friction plastic rollers (x6); 2mm cap screws (25mm x2, 30mm x2); 1.4mm hollow propeller shaft; carbon reinforced G13 gear & 8T pinion gear set; high speed EX counter gears (3.7:1); super hard small diameter low-profile tires (black); side mass damper set

The Advanced Pack delivers a VS chassis NEO-VQS intended for experienced hobbyists and club competitors who want reinforced components and a selection of speed-focused parts while keeping an easy snap-fit assembly.

Are the supplied FRP plates sized for the kit without modification?

The FRP plates match the mounting pattern provided on this kit's VS chassis. Fitting to different VS variants may call for slight trimming or alternate screw lengths to secure them properly.

Does the Light-Dash motor need any break-in or prep before use?

The Light-Dash motor is included ready to install. Some racers perform a standard break-in routine or swap to a different motor type depending on class regulations and desired performance characteristics.

What bearing type does the kit use in critical locations?

Where low-friction bearings are specified the kit uses 620 plastic bearings formed from POM. There is no separate metal bearing set included as part of the standard contents.

Can the supplied tyres be interchanged for softer compounds?

The kit ships with super hard low-profile tyres. They are press-fit and can be replaced with compatible low-profile tyres in the same diameter, enabling changes in grip characteristics if needed.

Are stabiliser parts included for technical sections of a track?

Yes. The kit includes side mass damper parts and a rear brake stay with brake sponge to help control the car on technical layouts and reduce unwanted bounce.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved