Tamiya 24325 - 1/24 Lexus LFA Transparent Display Model  [24325]

Tamiya 24325 - 1/24 Lexus LFA Full View Version (Model Car)
Price:
NZD$68.49
Brand:
Tamiya
Model:
24325
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
1 Reviews
Write a review
alt="Tamiya 24325 - 1/24 Lexus LFA Full View Version (Model Car)" title="Tamiya 24325 - 1/24 Lexus LFA Full View Version (Model Car)"
alt="Tamiya 24325 - 1/24 Lexus LFA Full View Version (Model Car)" title="Tamiya 24325 - 1/24 Lexus LFA Full View Version (Model Car)"
alt="Tamiya 24325 - 1/24 Lexus LFA Full View Version (Model Car)" title="Tamiya 24325 - 1/24 Lexus LFA Full View Version (Model Car)"
alt="Tamiya 24325 - 1/24 Lexus LFA Full View Version (Model Car)" title="Tamiya 24325 - 1/24 Lexus LFA Full View Version (Model Car)"

Transparent Lexus LFA Model by Tamiya 24325 for Detailed Display

The Tamiya 24325 Lexus LFA model presents a transparent body that reveals the car's mechanical layout at 1/24 scale. Builders can study the V10 engine bay, suspension linkages and drivetrain detail while keeping the completed model on show as a clear display piece.

Authentic touches are supplied in the box: finely detailed photo-etched meshes for the front grilles, magnetic components that let you set the rear wing either extended or flush, plus metal transfers for accurate badging and trim.

  • Scale: 1/24
  • Length: 188mm
  • Width: 85mm
  • Material: Plastic with clear parts
  • Photo-etched parts included
  • Magnetic interchangeable wing parts
  • Metal transfers included

 

Product Reviews
1 Reviews
rating
FULL RANGE RC products, very good service and communication. Thank you, Ms Kyle provided product technical support. Delivery on time, well packed and with mail tracking service. Very satisfied. Highly recommendation supplier. I'll come back to RC

Will the clear body show fingerprints or blemishes?

Clear parts can show oils and dust, so handle the shell with clean hands or gloves. A light polishing with a soft cloth and plastic polish will help remove minor marks before final display.

Is the wing position easy to change after assembly?

Yes, the kit uses magnets for the wing mounts so you can swap between deployed and retracted positions without cutting or permanent modification once the mounting areas are assembled.

Do the metal transfers require a special technique?

Metal transfers are applied like decals; soak briefly, slide into position, and set with a decal softener if needed. Seal them with a clear coat to protect the finish on long term displays.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved