Tamiya 42271 Precision Damper Retainers 2mm Drop [42271]

Tamiya 42271 - RC Big Bore AR Aluminum Damper Retainer - 2mm Down (4 pcs)

Price:

NZD$21.07

Brand:

Tamiya

Model:

42271

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

R/C General - Damper / Shock - Damper Parts

Tune Ride Height with Tamiya 42271 Retainers

The Tamiya 42271 aluminum retainers are built to give RC rigs using Big Bore Aeration Dampers extra setup range. The 2mm lower spring position increases the span of ground clearance settings so you can adjust handling for loose surfaces or tighter tracks.

What They Do and What They Fit

Material: Machined aluminum provides strength without adding unnecessary mass.
Functionality: Shifts the spring seat down by 2mm to expand clearance tuning options.
Compatibility: Specifically intended for Tamiya Items 54504 and 54505 dampers.
Contents: Comes with four retainers to outfit all corners of a car.

Can I use these on vintage Tamiya shocks?

They are intended for the modern Big Bore Aeration Dampers listed as Items 54504 and 54505; check dimensions against older shocks before fitting.

Will lowering affect spring preload?

Lowering the perch by 2mm changes static ride height and can slightly alter preload feel, so recheck sag and adjust springs if needed.

Do I need new springs after fitting?

Most setups will not require new springs; these retainers are a small incremental change, but if you want different handling you can revisit spring rates.