Tamiya 50509 - Front Spring Kit for 1/10 Formula 1 On-Road  [50509]

Tamiya 50509 - Front Spring Set RC F1 SP-509
Price:
NZD$7.06
Brand:
Tamiya
Model:
50509
GTIN:
4950344505098
Condition:
Brand New
Available in warehouse
Write a review

Refine front-end handling with Tamiya 50509

The Tamiya 50509 Front Spring Set caters to 1/10 scale Formula 1 on-road models. Inside you will find brass, silver and brown springs, each delivering a different tension so you can refine suspension behaviour for tight corners or faster straights. This set gives practical tuning options without changing other components.

Simple colour-coded tuning logic

Springs are colour marked to make setup changes quick and repeatable. Swap between brass, silver and brown to alter front stiffness to suit track grip, surface type, and driving style.

Compatibility notes and easy fit

Designed for use with Tamiya 1/10 F1 chassis, these springs are a direct replacement for front suspension needs. Installation is user friendly and gets you back on the road with minimal fuss.

Can I run these springs on different track surfaces?

Yes. By switching colours you can tune for high-grip tarmac or lower-grip surfaces. Start with the medium spring, then try softer or firmer options to suit the track.

Are these compatible with aftermarket shocks?

They are made for standard Tamiya 1/10 F1 shock assemblies. If your aftermarket shocks use the same spring seat and shaft size, they should work, but always confirm dimensions before fitting.

Do the springs need break-in or prep?

No special break-in is required. Inspect springs for damage, choose the colour that matches your setup, and install. Periodic checks for fatigue are good practice after heavy use.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved