Tamiya 53699 TNX / TGM-03 Track Brake Disk Upgrade OP-699  [53699]

Tamiya 53699 - TNX / TGM-03 Upgrade Brake Disk OP-699
Price:
NZD$22.97
Brand:
Tamiya
Model:
53699
Condition:
Brand New
Write a review

Sharper Brake Response for Club Racing

For TNX or TGM-03 owners wanting improved modulation, the Tamiya 53699 brake disk is an easy upgrade to sharpen braking behaviour. It is tailored for the TGM-03 chassis so you can install it with minimal alteration.

Better Modulation and Stability

This disk helps deliver predictable stopping power so you can judge braking points more accurately during fast laps. Its compatibility with the TGM-03 design makes it a sensible choice when retaining stock mounting hardware.

Quick Fit and Ongoing Care

Installing the Tamiya 53699 is straightforward; align the rotor and secure the mounting bolts firmly. Carry out periodic checks for tightness and surface condition to preserve braking consistency session after session.

Can I use this disk on a TNX without changes?

The disk is made with the TGM-03 in mind. TNX fitment may be possible if mounting points match, but confirm clearances and hub compatibility first.

Is brake bedding required after install?

A short bedding routine on a safe surface can help seat the rotor and pads for smoother initial performance. Follow standard bedding steps suited to your brake setup.

Any tips for preventing rotor noise?

Ensure the rotor is clean and bolts are torqued correctly. Remove any debris from the hub and check for runout to reduce squeal or vibration.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved