Tamiya 53752 Short Damper Spring 1/10 Glow Engine Setup  [53752]

Tamiya 53752 - 1/10 Scale Glow Engine R/C Short Damper Spring OP-752
Price:
NZD$8.79
Brand:
Tamiya
Model:
53752
Condition:
Brand New
Write a review

Dial Front End Balance with Tamiya 53752

If you want finer front suspension tuning on 1/10 scale glow engine RC cars, the short damper spring from Tamiya opens up additional setup choices. It lets club racers and weekend tuners tweak compression and ride feel for various track surfaces.

Sharper Steering Response

The Tamiya 53752 short damper spring delivers a high compression rate that tightens steering input and boosts mid-corner stability, helping drivers keep a consistent line at speed.

Where to Use This Spring

Designed for 1/10 glow engine applications, this short damper spring fits a range of compatible shocks and can be added without complex chassis changes on most matched vehicles.

Is the spring length different from standard units?

This short damper spring is shorter than standard long travel springs and is intended to reduce available suspension travel while raising compression rate. Check your shock geometry before fitting.

Will firmer springs wear tyres faster?

Stiffer front springs can change contact patch behaviour and may alter tyre wear patterns. Monitor tyre temperatures and adjust camber or toe to compensate if needed.

Can I pair this spring with softer rear springs?

Mixing front and rear rates is a common tuning method. A stiffer front spring paired with softer rear springs can reduce understeer, but test incrementally to find the balance.

Any maintenance tips after fitting?

After installation check spring seating and shock oil level, then make a few test runs to confirm rebound and compression feel. Re-torque shock caps and inspect for leaks.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved