Tamiya 54083 TA05 Short Rev Suspension Conversion  [54083]

Short Suspension Conversion for TA05 Chassis

The Tamiya 54083 Short Rev. Suspension Kit brings the same 1050 bearing uprights found on the TRF416 to your TA05 or TA05-IFS. That change improves power transfer and lowers chassis roll for more predictable handling on technical sections.

Included Component Breakdown

The kit ships with a complete set of parts to perform the conversion on compatible TA05 variants:

• RCC TRF416 C Bag x 1
• TB Evo5 D Bag (Dx2) x 2
• RCC TRF416 E Bag (E) x 1
• RCC TRF416 F4 Bag (F4) x 1
• OP.587 5mm Shim Set Shim Bag (0.1mm) x 1
• OP.585 3mm Shim Set Shim Bag (0.1mm) x 1
• 1050ZZ Bearing (CN) Domestic Stock x 8
• 4mm Adjuster 2(Black) (4) x 1
• 5mm Adjuster 2(Black) (4) x 3
• 3x10mm Screw [Black Trivalent Chromate] x 3
• 4.1x11.5x1.0mm Spacer (Alu.) Not anodized x 4
• 5.5x0.5mm Setting Spacer (Alu.) x 8
• 5.5x2.0mm Setting Spacer (Blue) x 4
• 5x6.4x1.5mm Spacer (Blue) x 4
• 3x10mm Screw [Black Nickel] x 3
• 4.1x11.5x0.5mm Spacer (Alu.) Not anodized x 4
• 5.5x1.0mm Setting Spacer (Blue) x 4
• 5.5x3.0mm Setting Spacer (Alu.) Not anodized x 8
• RCC TRF414X 3x0.7mm Spacer
• 5x9mm Ball Connector (Lube Plated) x 2
• RCC TB Evo IV Flange Tube S(Black Nickel) x 2
• 5mm Ball Connector (Black) m=0 x 10
• 3x10mm Screw Set (Black ACP) x 8
• 3x8mm Screw Set (Black ACP) x 2
• 3x3mm Grub Screw (W-Point) [Trivalent Chromate] x 5
• 4.5x3.5mm Flange Tube x 2
• RCC TRF416 Wheel Axle x 4
• 2.6x22mm Stainless Shaft x 2
• 2.6x25mm Stainless Shaft x 2
• RCC TRF414M Cross Joint x 4
• 2x9.8mm Needle Roller Pin x 4
• 3x2.5mm Grub Screw (Black) x 5
• TRF414M WCR (RC Limited Ed.) Clamp type Alu. Wheel Hub x 4
• 1.6mmx4mm Cap Screw (Ni) x 5
• 2x10mm Stainless Shaft x 4
• 1.5mm Hexagon Wrench (14x45) JIS Standard x 1
• Box (New) x 1
• Instruction Manual (New) x 1

*Note: Spike shaft sold separately.