Tamiya 54217 48 Pitch Pinion Set for TRF201 22T 23T  [54217]

Tamiya 54217 - RC TRF201 48 Pitch Pinion Gear - (22T,23T) OP-1217
Price:
NZD$16.95
Brand:
Tamiya
Model:
54217
GTIN:
4950344542178
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Fine Tune Your TRF201 Gear Ratios

The Tamiya 54217 RC TRF201 48 Pitch Pinion Gear set provides two distinct pinions so you can experiment with gear ratios for different track conditions. The 22T and 23T options make it simple to test acceleration and top speed changes.

Designed for Quieter, More Efficient Running

These pinions are produced with a tooth profile aimed at reducing operational noise and lowering friction between gear surfaces. The result is a cleaner feel through the drivetrain and improved power transfer efficiency.

Versatile Mounting Positions

Both gears include two grub screw holes to give you more flexibility in positioning on the motor shaft, helping achieve a reliable and consistent mesh for extended running sessions.

Can I use these on non Tamiya cars with 48 pitch pinions?

In many cases yes, as long as the car accepts 48 pitch pinions and the motor shaft and spacing match. Always verify fit before committing.

Will these reduce drivetrain noise noticeably?

You should notice a reduction in whine and mesh noise thanks to the improved tooth profile, especially when the mesh is set correctly.

How should I check gear mesh after installation?

Use a thin piece of paper or a purpose made shim, rotate the gears slowly, then tighten grub screws and recheck under slight load to confirm there is no binding.

Do I need special tools to fit these pinions?

Basic hex drivers and a small pair of pliers are usually enough, plus a starter tool to hold the motor shaft if you need to align the gear while tightening.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved