Precision Pinions Tamiya 54467 48 Pitch Pinion Gear Set 32T, 33T OP-1467  [54467]

Tamiya 54467 - 48 Pitch Pinion Gear 32T,33T OP.1467 OP-1467
Price:
NZD$17.68
Brand:
Tamiya
Model:
54467
Condition:
Brand New
Write a review

Upgrade Drive Response with Tamiya 54467

For hobbyists needing dependable gearing, the Tamiya 54467 48 Pitch Pinion Gear set provides both 32T and 33T sizes to cover common tuning choices. These pinions are engineered to work with 48 pitch spur gears for consistent engagement and power flow.

Hardened Steel for Endurance

Made from carburized steel, the pinions are built to resist wear during regular use. The offset twin screw holes allow fitting on motors with different shaft lengths, so you can adapt them to several chassis layouts.

Designed Teeth for Efficient Transfer

The rounded tooth profile helps cut friction between the pinion and spur, aiding smoother drive feel and reducing stress on drivetrain elements during running.

Will these pinions work with brushless setups?

They will mesh correctly in any system using 48 pitch spur gears; ensure your motor shaft and mounting match the pinion holes.

Are the 32T and 33T interchangeable in the same car?

You can swap between them to fine tune speed and acceleration, but you may need to adjust spur size or final gear ratio accordingly.

Do these require special lubrication?

Light application of a suitable gear lubricant helps reduce wear, but avoid heavy greases that can attract debris.

How should I check gear mesh after fitting?

Fit the pinion, rotate the drive, and adjust until the mesh shows slight clearance across the tooth face with no binding.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved