Tamiya 54625 CC-01 Street Conversion Lowering Kit [54625]

Tamiya 54625 - CC-01 Chassis Lowering Kit OP-1625

Price:

NZD$49.56

Brand:

Tamiya

Model:

54625

GTIN:

4950344546251

Condition:

Brand New

Quantity:

Write a review

alt="Tamiya 54625 - CC-01 Chassis Lowering Kit OP-1625" title="Tamiya 54625 - CC-01 Chassis Lowering Kit OP-1625"

Description
FAQ

Convert a CC-01 into a Street-Focused RC

The Tamiya 54625 CC-01 Chassis Lowering Kit is made to shift your CC-01 toward street driving characteristics. Lowering the chassis reduces body roll and centralises mass for neater handling on sealed surfaces.

What the Kit Contains

This kit supplies the core parts needed to achieve a low-profile road setup:

Low Height Tires: A set of four 73mm diameter tires is included to lower the overall profile and improve grip stability.
Plated Dish Wheels: Polished dish wheels to give a clean, street-ready look.
20T Pinion Gear: The supplied 20T pinion replaces a 16T unit to alter the gearing toward higher top speed.
Damper Oil and Springs: Includes damper oil (400, yellow) with white springs so you can dial in suspension response for smooth surfaces.
Flanged Spacers: Four flanged spacers are provided to maintain correct wheel spacing and alignment.

Do I need new wheel hexes or hubs for fitment?

The flanged spacers in the kit help wheel fitment, but check your wheel hex and hub setup. Some aftermarket wheels or hub combinations could need different hexes to sit correctly.

Is the 20T pinion safe with stock motors?

The 20T increases top speed by changing the gear ratio. It is commonly used but confirm your motor and ESC can handle the higher load and check motor temps during early runs.

What adjustments help on smooth tarmac?

Try the supplied 400 damper oil and white springs as a baseline, then tweak spring preload and damping to reduce pitch and improve response on sealed tracks.