57059 R/C Ford F-350 High-Lift Full Operation Kit - Tamiya 1/10  [57059]

Electric R/C setup kit of 1 among many acutely representative United States pick-up automobiles, the Ford F-350. The model features practical ladder framework, 3-speed transmission and shaft drive 4WD system. Truly step-by-step injection molded body and large diameter tires improve the trendy high-ground-clearance look. Initial marking stickers enhance the truck's fundamental realism.

METAL & METAL PLATED ELEMENTS

• Enough steel parts particularly ladder framework, under guard, front component guard, leaf springs and aluminum friction dampers are included.
• Roll club, road light, front grille, front/rear bumper, side-step, diff guard, tires and muffler function metal-plated finish.

ADD Light-emitting Diode LIGHTS (SOLD SEPERATELY) usage Multi-Function device to depict performing headlights, end lights and get club lights and also to have more amazing realism.

MULTI FUNCTION DEVICE This Multi Function product brings more satisfaction towards procedure concerning the R/C Ford F350. Featuring practical sound clips recorded from genuine vehicles, controllable Light-emitting Diode lights alongside movement effects, this system will significantly expand the potential of your Ford F350.

LADDER FRAME Durable and practical ladder framework includes steel channel and resin cross user.

PROPELLER SHAFTS F/R propeller shafts work universal joint to effectively go energy in the case suspension system system is upgrading and down.

FAST BATTERY HOLDER

• Battery held in low spot for exemplary fat balance and security.
• Comfortable access owner enables operating battery pack become exchanged without the elimination of human body.

4WS STEERING ROD

• 4 wheel steering is enabled with the addition of kit provided back axle anxiety pole.
• 4-wheel steering allows in addition tighter switching radius, perfect whenever making use of automobile in or in limited room.

WHEELS & TIRES

• Newly created monster automobile tires function lug pattern suited to driving on rough areas.
• Apply concrete to tires and tires whenever operating on rough terrain.
• Exhausted wheel hubs may be changed with #53056 Pin kind Wheel Adapter.

3-SPEED TRANSMISSION

Newly created 3-speed transmission provides
smooth whole lot running, and allows gear
changing while operating.

Includes slipper clutch as standard element of protect
gears during tough off road running

DIFFERENTIAL GEAR Durable resin gear situation with vital die-cast differential gear.

DIFFERENTIAL LOCK

• Differential lock, required for driving on rough roadways, are only enabled by eliminating F/R diff example covers and having decrease screw pins.
• Through differential lock, drive energy is sent even yet in the event tires using one part aren't grounded.

LEAF SPRING SUSPENSION F/R suspension system with friction dampers enables tension modification by altering wide range of leaf springs.

FRICTION DAMPERS

• Features red anodized aluminum cylinder. Damping effect is modified with the use of independently available Friction Damper Grease and including o-rings. Select prior to ground conditions and leaf springtime amount.
• Standard: normal working standard settings.
• Smooth: low-speed, high hold operating use 2 leaf springs and adjust stress utilizing damper oil (soft) #53174.
• Tricky: stable and high-speed running use 5 leaf springs and use damper oil (medium) #53175 or (hard) #53176.

BEARINGS

• Kit includes a whole of 42pcs of steel bearings(bushings) (35pcs x 1150, 4pcs x 1260, 2pcs x 850 size steel and 1pc of 1050 size ball bearings).
• Steel bearings require regular application of oil to keep performance. Individually available ball bearings cannot need this therapy, and are also recommended.

MOTOR

• This kit was indeed made become used merely with pre-supplied kind 540 motor and pinion gear.

NEEDED ITEMS (NOT INCLUDED) BROADCAST DEVICE TRANSMITTER, RECEIVER, ELECTRONIC SPEED CONTROLLER (ESC), STEERING SERVO & SHIFT SERVO

• Requirements 4-channel, 2-servo electronic proportional R/C product with electronic speed controller with adjustable ahead and reverse function.
• Use of Futaba Attack 4WD (4ch) or stick nice transmitter with slip trim is recommended to perform gear modification while operating. The Airtronics VG400/600 model radios are capable simply because they function fall trim and self fundamental control sticks.
• 2ch R/C product may possibly not be utilized since it cannot shift gears.
• PCM kind receiver is probably not used as it can certainly cause radio disturbance when working with with individually available Multi Function Device.

• Make utilization of high energy kind ESC with reverse function (optimum constant present: forward 120A, reverse 60A, FET legislation).
• A high-spec ESC is specially suggested whenever running on rough area.
• TEU-302BK Electronic Speed Controller (ITEM 45028) is recommended.
• Not to ever be utilized with TEU-101BK Electronic Speed Controller.

• While standard kind steering servo is sufficient, high torque servo is recommended whenever running on rough landscapes.
• Utilizing ITEM 50473 Tall Torque Servo Saver White or ITEM 51000 high Torque Servo Saver Ebony will further enhance effectiveness.
• Prevent little, big or high-speed servo.

• Tamiya 7.2V operating power packs (PRODUCT TA201)
• Eight R6/AA/UM3 batteries for transmitter.

Battery and broadcast information 1. Any Tamiya 7.2V battery pack allows you to power the car. Various milliampere-hour (mAh) values may affect the total amount of operating time enabled by the electric batteries. Including, 7.2V 1400SP electric batteries should ordinarily allow 10 to 15 moments of operating time. But make sure you remember that real working time may decrease as a consequence of considerable complete throttle and also other high energy running.

2. another 4-channel R/C product (self-neutral stick kind transmitter/receiver) is recommended for maximum procedure: FUTABA ATTACK 4WD (T4VWD/FP-R114H) The Airtronics VG400/600 model radios is likewise capable because they work slide trim and self basic control sticks.

take into account that using an R/C device without a self-neutral system may increase difficulty of procedure. Without self-neutraling sites (springtime loaded sticks) the operator is held to pay attention to the throttle and steering minus the help of self-centering springs, making driving the vehicle harder than it requires become.

4-channel wheel-type transmitters can be employed with ITEM 58372, but won't be in a situation become utilized with kit high in Multi-Function product (become released).

PPM receivers are suitable for usage with this specific kit.
PCM receivers are not suitable for kit designed with Multi-Function unit.

Other manufacturers' radio control services of 4 or even more networks can be utilized, but may not recognize probably the most functioning utilizing this kit.
Suggested using comparable R/C device as used in combination with ITEM 56511 Tractor Truck Multi-Function Control

ELECTRIC KITS NEED: (unless promoted an additional way above)

• Broadcast: 2-Channel with servo(s)
• Battery: 6-cell flat with standard Tamiya connector
• Charger: AC/DC timed or top for 6-cell battery pack
• Paint: PS for Polycarbonate/TS for ABS
• Misc. Products: Building and track gear