Tamiya 58534 - F104 ver.II Pro Chassis Kit - Track Tunable Pro  [58534]

Tamiya 58534 - 1/10 RC F104 ver.II Pro Chassis Kit - F104V.2
Price:
NZD$345.01
Brand:
Tamiya
Model:
58534
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Tamiya 58534 - 1/10 RC F104 ver.II Pro Chassis Kit - F104V.2" title="Tamiya 58534 - 1/10 RC F104 ver.II Pro Chassis Kit - F104V.2"
alt="Tamiya 58534 - 1/10 RC F104 ver.II Pro Chassis Kit - F104V.2" title="Tamiya 58534 - 1/10 RC F104 ver.II Pro Chassis Kit - F104V.2"
alt="Tamiya 58534 - 1/10 RC F104 ver.II Pro Chassis Kit - F104V.2" title="Tamiya 58534 - 1/10 RC F104 ver.II Pro Chassis Kit - F104V.2"

Refined Handling from the Tamiya F104 ver.II Pro

The Tamiya 58534 F104 ver.II Pro Chassis Kit is crafted for hobbyists aiming to raise their on-track consistency. This 1/10 scale assembly kit focuses on stable, adjustable behaviour and incorporates the PBLR concept from the RM-01 to give more precise rear geometry control than a standard T-bar.

Adjustable Rear Setup for Better Balance

With the Pivot Ball Link Rear Suspension, racers can vary pitch and roll interaction to suit different track surfaces. The central pivot ball, plus aluminium pitch and roll dampers, help keep the car planted and make it easier to dial in mid-corner balance.

Material Upgrades for Reliable Response

The kit includes race-minded parts such as a 3mm carbon fiber lower deck and brace to reduce unwanted flex. Aluminium turnbuckles and a redesigned aluminium differential housing contribute to a consistent drivetrain feel under load.

Specifications

  • Scale: 1/10
  • Construction type: Assembly kit
  • Terrain use: On-road
  • Drive-train: 2WD
  • Drive type: Pinion to spur gear
  • Drive line: Solid axle
  • Differential type: Ball pressure plate
  • Suspension: PBLR (Pivot Ball Link Rear Suspension)
  • Steering mechanism: Direct servo
  • Shock damper: Oil-filled damper
  • Shock damper material: Aluminum
  • Bearing: Shielded ball bearing
  • Chassis material: Carbon fiber plate
  • Adjustable camber: Front only
  • Adjustable toe angles: Front only
  • Adjustable ride height: Yes
  • Adjustable gear ratio: Yes
  • Adjustable wheelbase: Yes
  • Adjustable shock angle: Yes
  • Requires: 7.2 battery, charger, polycarbonate paint, radio gear, servo, receiver, wheels, tires, body set, motor, ESC

The Tamiya 58534 F104 ver.II Pro Chassis Kit rewards careful setup with stable corner entry and controllable mid-corner behaviour. Its solid parts package makes it a dependable base for competitors who tune regularly.

Yes, the chassis is well suited to club racing once you fit a compatible motor and tyres. Its adjustability helps match different club tracks.
If you have some kit-building experience, the parts fit together logically. Take care with the differential and PBLR links to ensure correct geometry.
Yes, many builders fit brushless motors and suitable ESC units. Confirm battery dimensions and gearing to avoid overheating the drive components.
Inspect and re-grease the differential every few running sessions, or sooner if you run in dusty conditions. Tighten mounting fasteners during each check.
The kit supports adjustable ride height and wheelbase via factory settings and optional link parts; consult compatible hop-up parts for larger changes.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved