Tamiya 85010 TS-10 French Blue Model Spray 100ml  [85010]

Tamiya 85010 - TS-10 French Blue
Price:
NZD$8.10
Brand:
Tamiya
Model:
85010
GTIN:
4950344988044
Condition:
Brand New
Write a review

Reliable coverage for kit painters

The Tamiya 85010 TS-10 French Blue spray comes in a 100ml can of synthetic acrylic lacquer, made to give model makers even, professional-looking finishes on plastic components. Its quick cure time helps you move through paint stages without long delays.

Works over cured acrylics and enamels

This formulation is compatible with cured acrylic and enamel topcoats, allowing you to layer colours confidently. As with all lacquers, allow previous coats to harden fully before overcoating.

Coverage tailored to scale modelling

Expect to spray two to three 1/24 scale car bodies per can depending on technique and coat thickness, making it a practical choice for most scale car projects.

Is Tamiya 85010 TS-10 suitable for painted plastics?

Yes, it adheres well to properly cured acrylic or enamel paints on plastic. Ensure previous layers are fully dry to avoid lifting or wrinkling.

Can I use this as a base for clear coat?

You can apply appropriate clear coats over fully cured TS-10, but test compatibility on a scrap piece first and allow adequate drying time between layers.

How should I prepare parts before spraying?

Clean parts to remove oils and dust, sand glossy areas if needed, and ensure surfaces are free of contaminants for best adhesion and finish.

What coverage can I expect from one can?

Coverage depends on spray distance and coat thickness, but typically a single 100ml can will cover two to three 1/24 scale bodies with moderate coats.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved