Tamiya 86014 PS-14 Copper Metallic RC Spray 100ml  [86014]

Tamiya 86014 - PS-14 Copper - 100ml Spray Can
Price:
NZD$8.10
Brand:
Tamiya
Model:
86014
GTIN:
4950344988693
Condition:
Brand New
Write a review

Paint Your Lexan Shell with Tamiya 86014 PS-14 Copper

The Tamiya 86014 PS-14 Copper spray is created to colour polycarbonate RC car bodies accurately. The 100ml can gives enough product to coat a standard shell and produce a vivid metallic sheen.

How to Spray for Smooth Coverage

Hold the can roughly 30cm from the inside surface and apply several thin passes rather than one heavy coat. Allow each layer to cure before adding another to improve toughness and evenness. Use Tamiya bottle paints for delicate lines or small areas where a brush is preferred.

Performance Near Fuels and Oils

This paint stands up to exposure from oil and fuel, so it is a good option for nitro and petrol powered cars. The formulation helps preserve the look of the body even after hard use.

No primer is needed for polycarbonate; spraying the inside of the shell with light coats is the recommended method.
Allow each coat to dry until tack free before applying the next, usually a few minutes depending on conditions.
It is intended for unpainted polycarbonate; adhesion on previously painted surfaces may vary so test first.
Yes, its resistance to fuel and oil makes it suitable for nitro powered models when applied correctly.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved