Tamiya 86030 PS-30 Brilliant Blue 100ml Polycarbonate Spray  [86030]

Tamiya 86030 - PS-30 Brilliant Blue - 100ml Spray Can
Price:
NZD$7.93
Brand:
Tamiya
Model:
86030
GTIN:
4950344988792
Condition:
Brand New
Write a review

Fresh Blue Finish with Tamiya 86030 PS-30

The Tamiya 86030 PS-30 Brilliant Blue spray is formulated for painting polycarbonate RC shells, providing consistent coverage from a 100ml aerosol. It is ideal for modellers wanting a reliable blue tone on clear bodies.

Inside Spraying Technique

Spray from the inside of the shell, keeping roughly 30cm between the can and surface and using steady sweeps. Allow adequate drying time between thin coats to improve adhesion and produce an even look without heavy build-up.

Resistant Finish for Different Powertrains

This paint shows good resistance to oil and fuel, so it works well on both electric and nitro setups. For precise lines, use dedicated polycarbonate bottle paints rather than masking over a thick sprayed coat.

If the existing paint is designed for polycarbonate, you can spray over it after scuffing lightly and cleaning. For best adhesion remove loose paint and test a small area first.
Wait until each coat is touch dry before applying the next, typically several minutes depending on temperature. Allow full cure before handling or fitting the body.
Use liquid mask or purpose-made polycarbonate masking film for neat window edges. Peel the mask carefully after full cure to avoid lifting the paint.
Mixing aerosol colours is not recommended. If you need a custom shade, layer compatible PS colours with test panels first or use complementary bottle paints for small accents.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved