Tamiya 9335061 1/10 Off-Road Spare Wheel for Tamiya 58686 Vanquish VQS (2020)  [9335061]

Wheel Overview for Vanquish VQS

This item is an RC-scale spare wheel made to suit the Tamiya 58686 Vanquish VQS (2020) 1/10 off-road kit. Provided as the wheel component only, it is prepared for tyre mounting and repair use when the original wheel is worn or damaged.

The wheel's main purpose is to re-establish a correct tyre mounting surface, preserve wheel concentricity, and support repeatable handling checks during setup. It is not supplied as a full tyre-and-wheel assembly.

Installation is typically simple: remove the tyre as required, locate the wheel onto the hub so the hex and locator align, then secure with the vehicle's original nut or flange nut. Perform a spin-check for runout and confirm the wheel clears suspension and body fittings before use.

During tuning, replacing a wheel affects tyre seating and track width. Check tyre selection and wheel offset so suspension travel and steering geometry are not inadvertently altered. Balance the tyre if any vibration is noticeable at speed.

Service tips: inspect for cracks or distortion after heavy impacts, keep the bead seat clear of debris, and replace the wheel if mounting surfaces show damage to prevent tyre slippage or uneven wear.

Compatibility: 58686 Vanquish VQS (2020).