Tamiya 9495539 Land Cruiser CR01 Paint Masking Kit  [9495539]

Tamiya 9495539 - RC Sticker & Masking: 58405 Toyota Land Cruiser 40 - CR01
Price:
NZD$17.96
Brand:
Tamiya
Model:
9495539
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Detail Masking for RC Land Cruisers

The Tamiya 9495539 masking set is tailored for the CR01 Toyota Land Cruiser, giving modders a reliable way to mask panels and trim. The kit helps you retain crisp paint boundaries and tidy finishes on complex bodylines.

Control Paint Bleed

Clean paint transitions are easier when using purpose-made masks. Tamiya's parts help prevent overspray and bleeding around windows, rooflines and wheel arches on the Toyota Land Cruiser CR01. This is useful whether you are restoring an original scheme or doing a fresh repaint.

No-Residue Removal

These masks pull away cleanly when removed, so you can apply decals and clear coats without extra cleaning. They follow the CR01 shell geometry to cover curves accurately, ideal for those who swap liveries frequently.

How tight is the fit to the CR01 body?

The kit is cut to match CR01 contours closely. You should still check alignment before spraying and press edges down firmly to ensure a snug seal.

Can I trim the masks for custom shells?

Yes. The masking material trims cleanly with a hobby knife, allowing you to adapt pieces to slightly different or modified bodies.

Are these masks suitable for lacquer finishes?

They work with most model paints, but allow each coat to cure fully before applying masks. For aggressive solvents consult the paint maker to avoid lifting the mask surface.

Any hints for curved panels?

Use small overlapping mask pieces and warm them slightly between fingers to help them conform to compound curves for a tight seal.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved