Tamiya CC02 G500 Brass Pendulum Weight and 12.5mm Hex Upgrade CC2023+12.5 by GPM  [CC2023+12.5]

Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5
Price:
NZD$112.10
Brand:
GPM
Model:
CC2023+12.5
GTIN:
4894538339246
Condition:
Brand New
Write a review
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"

Pendulum hub weight and hardened driveline set for CC02

This parts kit for the Tamiya CC02 MERCEDES-BENZ G500 outfits the wheels with pendulum-style brass weights, fits 12.5mm wider hex adaptors and includes hardened driveline components aimed at trail and crawler use. The additions increase unsprung mass per wheel, widen the stance by roughly 12mm with the hex adaptors, and upgrade selected front and rear driveline pieces to hardened steel for longer service life.

Delivered as a grouped 20-piece kit, the pack targets CC02 chassis vehicles to help maintain tyre contact and vehicle balance on steep or broken terrain. Fitment centres on wheel hub and driveline swap points and is compatible with standard CC02 wheel mounting geometry.

Specifications

  • Item: 20 pcs set including pendulum weights, front CVD joints, rear drive shafts, 12.5mm wider hexes, pins and E-clips
  • Material: Brass pendulum weights, Hardened Steel #45 front CVD joints, stainless steel pins, Delrin collar bearings
  • Model Number: CC2023+12.5
  • Compatibility: Tamiya CC02 MERCEDES-BENZ G500
  • Weight: Single pendulum with bearing approximately 119 grams

Use this kit to add targeted downforce at each wheel, slightly widen the track for roll resistance, and replace wear-prone driveline parts with hardened steel for dependable crawling performance on CC02 builds.

Does the kit include all fasteners needed?

Yes, the kit supplies the listed stainless steel pins and E-clips for standard CC02 mounting; typical toolset like hex drivers and pliers will be required for fitment.

How much wider does the track become?

The 12.5mm wider hexes increase wheel offset so the effective track widens by about 12mm, improving lateral stability on obstacles and ledges.

Are the pendulum weights serviceable?

Each pendulum uses a bearing and Delrin collar which can be inspected and cleaned; bearings and collars are serviceable if required to keep smooth pendulum action.

Will drivetrain upgrades require gearbox changes?

The hardened front CVDs and rear shafts are designed to drop in without gearbox modification on stock CC02 setups, but always check shaft fits and replace worn components as needed.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved