Tamiya F104 Graphite Top Deck for LiPo Clearance - F104-12/WO by 3Racing  [F104-12/WO]

Graphite top deck tailored for the F104

This RC graphite upper deck is produced for use on the Tamiya F104 chassis and is specified as compatible with LiPo battery installation in the product name. It serves as the structural top plate that interfaces with the chassis rails and battery compartment to affect torsional stiffness and battery space without altering drive components or electronics placement.

Compatibility and fit

• The listing denotes compatibility with the Tamiya F104 platform; confirm fit by laying the deck over your F104 mounting points and checking battery bay clearance before securing.
• Since the deck is described for LiPo use, double check your LiPo pack measurements to ensure there is adequate clearance and safe access to connectors inside the F104 battery area.

Installation notes

• Use the chassis factory mounting points for installation; align screw holes and loosely fit fasteners initially to verify consistent contact and clearance across the chassis.
• After confirming position and battery fit, tighten mounting screws in stages so the deck seats evenly and does not introduce preload or twist into the chassis rails.

Tuning role and handling effects

• The graphite top plate generally increases torsional rigidity relative to thinner or composite decks, which can produce a sharper turn-in and reduce flex during high load corners.
• Any stiffness or battery position changes affect the vehicle's centre of gravity and balance; expect moderate handling shifts and revisit dampers and antiroll settings as required.

An aftermarket hop-up aimed at supporting LiPo fitment and increasing chassis stiffness for the Tamiya F104; verify fitment and test drive to assess setup changes.