This light-blue anodised aluminium front C-hub is an aftermarket replacement for TAMIYA TT-02B and DF-02 chassis. Precision-machined to replace the stock plastic unit, it delivers a firmer steering mount and increased resistance to wear for touring and drift setups in 1/10 scale.
Installation notes: remove the factory C-hub, transfer any existing pins or bushings as needed, then secure the alloy hub with the original fasteners. After fitting, inspect kingpin straightness and wheel bearing seating, then recheck toe and camber as small material thickness changes can alter steering geometry. Follow standard workshop steps: hand-start fasteners, then tighten to a snug finish; consider threadlocker on steel screws if preferred.
Why fit it: using an aluminium hub reduces flex in the front end under load, helping steering remain consistent during aggressive cornering and braking. The change is typically incremental, so pair this upgrade with suspension and alignment adjustments to achieve the desired handling balance.
Copyright © 2008-2026 rcjaz.co.nz All rights reserved
