This aluminium front and rear damper pair is built for the Tamiya GF01 RC platform and supplied as a 1 pr set with plastic ball tops on each piston rod end. They act as scale suspension replacements intended to improve mechanical fit and give basic damping adjustment for GF01 models.
The dampers feature a machined aluminium outer tube to preserve bore consistency while the plastic ball tops interface with common GF01 ball studs. Replace the original shocks by transferring compatible springs and shafts and secure with the stock mounting hardware. Use standard shock oil and conventional assembly procedures during setup.
For tuning, these units affect rebound and compression within the GF01 suspension geometry. Tweak spring preload, swap oil weights, and vary damping length to suit handling and surface conditions, keeping in mind these components are sized for model use.
After installation validate geometry and run progressive tests while adjusting oil and spring settings to find the best balance for your GF01 setup.
Copyright © 2008-2026 rcjaz.co.nz All rights reserved
