Tamiya Honda City Turbo WR02C Aluminium Front C-Hub WRC2020 by GPM  [WRC2020]

WR02C Front Steering Hub Upgrade

This aluminium front C-hub is an aftermarket replacement designed for the Tamiya Honda City Turbo WR02C chassis. It serves as the steering knuckle interface on the front suspension, providing a firm mount for the hub carrier and steering link while keeping the WR02C geometry unchanged.

Supplied as a 1pr set, the part is intended to directly replace the original plastic hubs. Typical installs reuse the existing wheel bearings and hub pins; only the C-hubs are exchanged to influence steering stiffness and behaviour. This is a scale-model component and is not related to full-size vehicles.

For tuning, aluminium hubs are chosen to limit flex under load versus plastic, which can improve turn-in and give steadier steering on high-traction surfaces. Always check linkage clearance and steering geometry during installation to avoid binding.

Use these aluminium C-hubs when you want a less flexible steering interface for scale tuning or to replace worn parts; recheck alignment after fitting.