TAMIYA M1025 Hummer Front and Rear Dampers 60mm - HM1060F/RPBT by GPM [HM1060F/RPBT]

Tamiya M1025 Hummer Aluminium Front/Rear 60mm Damper With Plastic Ball Top - 1pr set - GPM HM1060F/RPBT

Price:

NZD$21.28

Brand:

GPM

Model:

HM1060F/RPBT

GTIN:

4894538126

Condition:

Brand New

Color Available:

Quantity:

Write a review

Description
FAQ

Aluminium 60mm Dampers for M1025

This aluminium damper set is produced as an RC-scale replacement for the TAMIYA M1025 Hummer chassis, pairing aluminium bodies with plastic ball tops and matching the specified 60mm mounting length for front and rear locations.

It serves as a basic hop-up to support maintenance and simple tuning adjustments. Fitment follows standard shock replacement practice on TA-compatible Tamiya layouts; ensure the ball top nests on the shock mount and that the rod travel is unobstructed.

When reassembling, use the same family of springs and shock oils already chosen for your M1025 Hummer to keep handling consistent. Verify all mounting hardware and run bench checks before trialing on varied surfaces.

Compatible Models

TAMIYA M1025 HUMMER

How should I tune shock oil and springs with these dampers?

Start with the same shock oil weight and spring rates you used previously on the M1025 Hummer, then adjust oil viscosity or spring preload in small steps to fine tune body roll and rebound.

Are there any fitment traps to watch for?

Check that ball studs and shock eyelets align without forcing the rod; confirm the plastic ball top does not bind on the mount and that full travel is available before final tightening.