Tamiya TA01 Front C-Hub Alloy with 5x8 Bushing TA1020 by GPM  [TA1020]

TA01 front hub details

This alloy bearing C-hub is an aftermarket replacement crafted for the Tamiya TA01 chassis, giving a sturdier pivot mounting point and a built-in 5x8 bushing for accurate alignment. It is intended for RC hobbyists who want a metal hub surface for routine setup and repair work.

The component takes the place of the stock plastic C-hub and provides a consistent contact surface where the steering knuckle interfaces with the hub carrier and where the bushing or bearing seats. Its primary benefit is stabilising pivot geometry, reducing deflection under steering loads, and preserving toe and camber settings lap after lap.

Installation guidance: this C-hub mounts to the same TA01 locations as the original and accepts the 5x8 pivot bushing. Use the existing TA01 hardware for fit checks, ensure the bushing is seated correctly with the steering arm, and confirm suspension articulation is unobstructed before final assembly.

Recommended where a firmer steering mount and repeatable pivot alignment are useful for TA01 setup and track consistency.