Tamiya TL-01 Aluminum C Hub Upgrade for GF-01 and WR-02 - TL01-13306-LB by Jazrider  [TL01-13306-LB]

Precision C Hub for Tamiya Chassis

This aluminum C hub is an RC-scale replacement manufactured to fit Tamiya TL-01, GF-01, and WR-02 chassis configurations. The light blue finish identifies the machined metal part that replaces the original plastic component and provides a stable mounting face for knuckles and lower links.

Application: the C hub establishes the steering knuckle position and the lower suspension link attachment points. Replacing the stock hub with this aluminum piece improves repeatability of suspension geometry and strengthens mounting stability during setup and tuning. It is intended as a like-for-like replacement for the chassis models listed.

Installation notes

• Remove the stock C hub from the knuckle and move across any bushings or shims you need to keep before installing the aluminium item.
• Confirm screw lengths and that threads fully engage so the hub does not foul the knuckle or bearings.
• After fitting, check wheel alignment and suspension travel and then set toe and camber to suit.

Tuning considerations

• Aluminum hubs typically deliver steadier bearing seating and lower flex than some plastics, which can alter steering feel and cornering balance.
• When tuning, use the same tyres and damper settings for comparison so you can isolate the hub's effect on handling.